An Easy Way To Fix BIOS Memory Reset Issues

Restore your computer to peak performance in minutes!

  • Step 1: Download and install ASR Pro
  • Step 2: Open the program and click on "Scan"
  • Step 3: Click on "Repair" to start the restoration process
  • Download the software to fix your PC by clicking here.

    If you have reset the BIOS memory on your PC, this guide can help you fix it. Wiping out the CMOS on your motherboard will reset your own BIOS settings to factory defaults, with the settings listed by the motherboard brand being the ones practically people would use. After restoring CMOS, you may need to configure some of your new hardware slots in order to access the BIOS setup utility. uses a security service to protect against online attacks. This process is automatic. Heand should be redirected after validation.


    < / thead >



    Reference ID IP address Date and time

    c7aca1bc59d3b2f35e915973a117d763 04/03/2022 06:14 UTC

    From time to time we encounter some or different types of PC hardware problems. Sometimes the underlying problem is well known, and a simple Google search can provide answers by country.

    But it often happens that many people understand the reason for the absence of a problem and therefore do not know how to solve it.

    If this happens to your computer or your friend’s computer in an incredible way, a possible solution is to help reset the BIOS, so you need to permanently erase the CMOS memory. today, Schedule to see how it can be bigger and different with any process.

    Remember, this applies to cases where you have tried to identify the problem and have absolutely no idea what it could be.

    What Is CMOS Memory?

    reset bios memory

    The cmos memory stores all the information that the BIOS uses to select a system at boot time.ovaries.

    reset bios memory

    Everything that is done here is related to the speed of the bus and the clock speed of the processor itself. If you screw up these settings, you will make your computer so insecure that it will probably never boot properly.

    Although this can be relatively easily fixed. All you have to do is almost certainly clear all the information that has accumulated in the CMOS so you can see that the BIOS is running at factory defaults, which should allow the computer to boot normally unless the error is related to something else. . p>

    How To Clear CMOS Memory?

    Is it OK to reset BIOS?

    Resetting your current BIOS restores it to the actual configuration saved so this simple method can also be used to reset some systems after other changes. Whatever situation you find yourself in, remember that resetting the BIOS is a simple process for both new and experienced users.

    Method: BIOS Setting 1

    Depending on the type of feedback you’re already receiving from your computer, you can choose the method that works best for you.

    If you’re trying to clear CMOS memory due to hardware compatibility issues, this is usually the easiest way. Works

    This is only if you can at least display a window from which you can access the BIOS. If so, the easiest way to successfully clear the memory is to use the BIOS menu itself.

    Dosgo to boot menu

    When you restart your computer, you should definitely find a window with resources, bootable which will disappear in a second. This is the same motherboard window that usually appears at the bottom along with the screen and shows you our own buttons that you need to press when you need to access the BIOS menu.

    Depending on the vendor, these common keys are F2, F12, f8, or possibly the delete key. If they didn’t have enough time to do so, click restart any computer to access the new BIOS option.

    Once you’re in the menu, you’ll need to look for reset options, which may appear with “Restore Defaults”, “Load Factory Defaults”, “Clear BIOS Settings” or something similar. Select an option and perform a good factory reset.

    Direct Method 2: On Motherboard

    If for some reason you are unlikely to get access to the BIOS, you will most likely need access to the PC motherboard. If a laptop, this is a computer process simple.

    It is recommended to remove the motherboard from this particular laptop model by obtaining manuals online or those included with each purchase. you

    In any case, you now need to go to the motherboard and then find a new coin cell battery. We won’t be using it in this scenario. All we need now is a movement that should appear next to the car battery, which will reset the CMOS memory directly.

    Without a doubt, the best way to reset the CMOS memory is to look at the board model information and then go through the motherboard manual sections in its entirety. However, this process can be the same on almost any computer.

    Just look for a radio button named “CLEAR CMOS”, “CLR “clear”, CMOS”, “PASSWORD” or something similar, and then enable some of these protocols. It will be like this.

    Restore your computer to peak performance in minutes!

    Is your PC running slow and constantly displaying errors? Have you been considering a reformat but don't have the time or patience? Fear not, dear friend! The answer to all your computing woes is here: ASR Pro. This amazing software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. So long as you have this program installed on your machine, you can kiss those frustrating and costly technical problems goodbye!

  • Step 1: Download and install ASR Pro
  • Step 2: Open the program and click on "Scan"
  • Step 3: Click on "Repair" to start the restoration process

  • The memory may have been erased. Just make sure the motherboard is not plugged into an outlet so you don’t have static electricity that could damage the motherboard.

    Sp Step 3: Remove The Battery

    If we can’t just access the bios AND, this button doesn’t exist, as in the previous method mentioned above, we have no other choice but to remove the option.-it’s RAM with cmos so that the information is not reduced.

    How do I reset BIOS to default?

    access the BIOS setup utility. Access to view the BIOS.Press F9 to automatically load factory default processes.confirm the changes by highlighting OK and pressing Enter.To save your changes and exit the BIOS utility setup, press the F10 key.

    Pull it out and hold it every few minutes and the memory will be automatically cleared and reset to factory settings. Removing the battery can be more strenuous, again depending on the motherboard. Please note that in some cases it is almost impossible to remove it. Don’t overdo it.

    Download the software to fix your PC by clicking here.